Ricoh A156 - Paper End Detection

11.5 PAPER END DETECTION
- A153/A155/A156 copiers -
If there is some paper in the paper tray, the paper end feeler [A] is raised by
the paper stack and paper end sensor [B] is deactivated.
When the paper tray runs out of paper, the paper end feeler drops into the
cutout [C] in the tray bottom plate and the paper end sensor is activated.
When a paper end condition occurs, the tray lift motor lowers the paper
bottom plate and the pick-up solenoid turns off.
[A]
[B]
[C]
Detailed
Descriptions
STM 2-85 A156/A160/A162