4.7 ORIGINAL FEED-OUT MECHANISM
When the scanner reaches the return position, the copier’s CPU sends the
feed-out signal to the DF CPU. When the DF receives the feed-out signal,
the belt drive and feed-out motors [A] turn on.
The feed-out sensor [B] installed in the feed-out section counts the number
of pulses to calculate how long the feed-out motor must stay on to feed the
original out of the machine completely.
[A]
[B]
[B]
AUTO REVERSE
DOCUMENT
FEEDER A548
STM 3-11 A156/A160/A162
To Next Page
Loading...
