13.2 FUSING DRIVE AND RELEASE MECHANISM
The main motor [A] drives the fusing unit through a timing belt [B] and some
gears [C].
The fusing unit drive release mechanism automatically disengages the
fusing unit drive gear [D] when the front cover [E] is opened. This allows the
fusing unit drive gear to rotate freely so that misfed paper can be easily
removed.
When the front cover is opened, the actuator plate [F] pulls release wire [G].
The wire pulls the fusing unit gear bracket [H] and the fusing unit drive is
disengaged.
[B]
[A]
[C]
[G]
[D]
[E]
[F]
[H]
Detailed
Descriptions
STM 2-105 A156/A160/A162
To Next Page
Loading...
