3. BASIC OPERATION
3.1 NORMAL MODE AND SORT/STACK MODE
Copies [A] exiting the copier pass through the entrance guide plates to the
turn gate area. The turn gate [B] will send copies either to the proof tray or to
the bins, depending on the mode.
- Normal mode -
In this mode, copies pass from the turn gate section to the proof tray.
When the copier signals the S/S CPU to start the motor, the roller drive
motor [C] rotates all the rollers in the S/S paper path. At the same time, the
turn gate solenoid [D] is energized and the turn gate turns clockwise. The
turn gate directs copies to the proof tray [E] through the vertical transport
and proof tray exit rollers [F and G].
[E]
[C]
[G]
[F]
[B]
[A]
[D]
Sorter Stapler
A554
STM 6-7 A156/A160/A162
To Next Page
Loading...
