Symbol Name Function
Index
No.
Switches
SW1 Upper Lift Limit
The bin lift motor stops when this switch detects
the upper limit position of the bins.
22
SW2 Wire Tension
The bin lift motor stops when this switch detects
the lower limit position of the bins through the bin
lift wire tension.
21
SW3 Front Door Cuts the 24 Vdc line when the front door is open. 14
SW4 Sorter Stapler Set
Cuts the 24 Vdc line when the sorter stapler unit
is open.
7
SW5 Staple End Detects the staple end condition. 10
SW6 Staple Guide Detects whether the staple guide plate is closed. 9
SW7 Staple H.P.
Detects whether the staple hammer is at the
home position.
11
A156/A160/A162 6-6 STM
To Next Page
Loading...
