- Stapler inoperative conditions -
1. Under the following conditions, the staple mode is inoperative when the
staple key on the operation panel is pressed.
•
If there is paper in a bin before the main switch is turned on.
•
If the selected paper size does not match the stapling specifications.
2. Under the following conditions, the staple mode is canceled.
•
If paper is loaded into a bin by hand while staple mode is selected.
•
If only one copy is delivered to the bin.
•
If the jogger operation has not been performed.
•
If some already-stapled copies are present in the bins.
•
If the number of sheets delivered to the bin exceeds the stapler
capacity.
Stapler capacity: 2 to 20 sheets for A4, B5, and 8
1/2
" x 11"
2 to 10 sheets for B4, A3, 8
1/2
" x 14", and
11" x 17"
The stapler capacity can be increased by 5 for both paper size
types by changing the SP mode setting for the Stapling Limit. (If this
is done, the stapling function is not guaranteed.)
3. Under the following conditions, manual stapling mode in sort mode is
inoperative.
•
If paper is loaded into a bin by hand while sort mode is selected.
•
If the paper size in the bin does not match the stapling
specifications.
•
If only one copy is delivered to the bin.
•
If copies of different width are delivered to the bin.
•
If some already-stapled copies are present in the bin.
Sorter Stapler
A554
STM 6-23 A156/A160/A162
To Next Page
Loading...
