Ricoh A156 - Page 266

5. EXIT ROLLER DRIVE MECHANISM
F: Transfer Wheel
G: Bin Drive Belt
H: Bin Drive Pulley
I: Exit Roller Pulley
J: Upper Paper Guide
K: Lower Paper Guide
L: Roller Drive Motor Pulley
The exit rollers [A] take over paper transport from the copier. When the
copier sends the paper feed signal to the selected paper feed station, the
exit rollers start rotating. The exit rollers continue to rotate for 250
milliseconds after the copy paper has gone through the paper sensor [B].
The roller drive motor [C] rotates the lower exit roller via the roller drive belt
[D]. The shaft of the lower exit roller is a cylindrical cavity type which rotates
around the transfer wheel shaft [E]. The paper sensor is positioned just in
front of the exit rollers. The paper sensor detects misfeeds in the sorter.
[H]
[E]
[L]
[A]
[I]
[D]
[J]
[K]
[L]
[C]
[B]
[F]
[G]
[H]
Sorter
A557
STM 9-5 A156/A160/A162