Dimensions:
Width Depth Height
A153 copier 1030 mm (40.6") 655 mm (25.8") 606 mm (23.9")
A157/A161 copier 900 mm (35.5") 655 mm (25.8") 606 mm (23.9")
A156 copiers 1258 mm (49.6") 655 mm (25.8") 606 mm (23.9")
A160/A162 copiers 1128 mm (44.5") 655 mm (25.8") 606 mm (23.9")
Measurement Conditions
1) With by-pass feed table closed
2) With platen cover and copy tray attached
3) With LCT cover closed
Weight:
Weight
FT5035 A153 copier About 70 kg (154.2 lb)
FT5535 A156 copier About 82 kg (180.7 lb)
FT4027 A157 copier About 67 kg (147.7 lb)
FT4527 A160 copier About 80 kg (176.4 lb)
FT4022 A161 copier About 67 kg (147.7 lb)
FT4522 A162 copier About 80 kg (176.4 lb)
Zoom: From 50% to 200% in 1% steps
Copying Speed (copies/minute):
A4 sideways/
11" x 8
1/2
"
A3/11" x 17" B4/8
1/2
" x 14"
A153, and A156
copiers
35 20/19 22
A157, and A160
copiers
27 15/14 17
A161, and A162
copiers
22 12 -
Warm-Up Time A153, and A156 copiers:
Less than 110 seconds (20°C)
A157, and A160 copiers:
Less than 80 seconds (20°C)
A161 and A162 copiers:
Less than 60 seconds (20°C)
First Copy Time:
Paper Feed Station
A4/11" x 8
1/2
" (sideways)
A153, and A156
copiers
A157, and A160
copiers
A161, and A162
copiers
1st Tray
5.2 s (except for
A156)
5.9 s (except for
A160)
5.9 s (except for
A162)
2nd Tray 5.7 s 6.6 s 6.6 s
By-pass 4.8 s 5.6 s 5.6 s
LCT 5.0 s 5.9 s 5.9 s
Note:
In A156, A160 and A161 copiers, the 2nd tray in the above table is
called the 1st tray (see Installation - Paper Feed Station Definition).
Rev. 7/95
Overall Machine
Information
STM 1-3 A156/A160/A162
To Next Page
Loading...
