6. IMAGE TRANSFER
Paper is fed to the area between the drum surface and the transfer belt at
the proper time so as to align the copy paper and the developed image on
the drum surface. Then, the transfer bias roller applies a strong negative
charge to the reverse side of the copy paper through the transfer belt. This
negative charge produces an electrical force which pulls the toner particles
from the drum surface on to the copy paper. At the same time, the copy
paper is electrically attracted to the transfer belt.
7. PAPER SEPARATION
Paper separates from the OPC drum as a result of the electrical attraction
between the paper and the transfer belt. The pick-off pawls help separate
the paper from the drum.
8. CLEANING
The cleaning blade removes toner remaining on the drum after the image is
transferred to the paper.
9. QUENCHING
Light from the quenching lamp electrically neutralizes the charge on the
drum surface.
Detailed
Descriptions
STM 2-3 A156/A160/A162
To Next Page
Loading...
