Ricoh Aficio 2035e - Reading Sc740;741 Details from Led2

READING SC740/741 DETAILS FROM LED2:
SM 4-23 B135/B138
Trouble
shooting
4.6 READING SC740/741 DETAILS FROM LED2:
The following describes the method for using the LED to read the details for
SC740/741 (Booklet Finisher-related errors), as this information is not displayed on
the machine operation panel.
1. Remove the upper rear cover.
2 It is possible to determine which SC740/741 error is occurring by observing the
number of flashes and flashing intervals of LED2.
2-1 Flashing pattern when Finisher is operating normally:
Repetition of 500ms ON, 500ms OFF.
2-2 Flashing pattern when an SC has occurred:
Example: Error code 1-4-2. (Jogger Motor Error)
Flashing intervals of LED2 for SC 740/741 error.
START : 2 sec ON, 1 sec OFF
: 3010ms ON ! 500ms Break (OFF)
4: 300ms ON, 200ms OFF (repeat 3 times) ! 300ms ON ! 500ms
Break
2: 300ms ON, 200ms OFF ! 300ms ON ! 500ms Break
Return to START and repeat.
⇒
⇒
Rev. 04/2004
A
B
C
D
E
LED
ON
LED
OFF
2sec 1sec
ON: 300m s
O FF: 200m s
START
1
4
2
R epeat
Break: 500m s
Break: 500m s
Break: 500m s
A.
B.
C.
D.
E.