128 MB MEMORY (G331)
B654 8 SM
1.4 128 MB MEMORY (G331)
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: Only one optional memory DIMMs are available: 128 MB (G331). It can be
installed in the one available slot (only one can be installed).
1. Remove the controller board and HDD unit (!1.2.1).
2. Install the memory DIMM [A] in the slot [B] of the controller board.
• Set the edge connector in the slot at a 30 degree angle.
• Push in slightly until you hear it click.
• Push down slowly until it snaps in place.
NOTE: To remove the memory DIMM, pull out the plastic arms on either side
of the slot to release it.
B654I107.WMF
[A]
[B]
To Next Page
Loading...
