1 August, 2003 ADDRESS BOOK
SM 91 B653
Fax Option
B653
There are three methods you can use to back up address book data:
• HDD ←→ IC Card
• FCU (MBU) ←→ IC Card
• HDD ←→ FCU
Each is described below.
1. HDD ←→ IC Card
Address data stored on the HDD can be uploaded to an IC card with SP5846 51
(UCS Settings - All Directory Info. Upload), or address data backed up on the IC
card can be downloaded to the HDD with SP5846 52 (UCS Settings – All Directory
Info. Download).
2. FCU (MBU) ←→ IC Card
Address data stored in the FCU (MBU) can be uploaded to an IC card with SP5846
51 (UCS Settings - All Directory Info. Upload), or address data backed up on the IC
card can be downloaded to the FCU with SP5846 52 (UCS Settings – All Directory
Info. Download).
3. HDD ←→ FCU
Address data stored on the HDD can be uploaded to the FCU (MBU) with SP5846
80 (UCS Settings - FCU Backup), or when there is address data in the FCU and
the HDD has just been replaced, this data is downloaded automatically to the new
HDD.
SP Modes
1. SP5846 051 UCS Settings - All Directory Info. Upload
This SP mode is used to upload address data to an IC card. The machine
automatically detects where the address data is stored. If there is address data on
the HDD, the address data from the HDD is uploaded to the IC card. If the HDD is
not present, then the address data from the FCU is uploaded. If one IC card is not
large enough to hold all the address data, as many IC cards as needed can be
used to hold all of the address data.
2. SP5846 052 UCS Settings – All Directory Info. Download
This SP mode downloads address data from an IC card. The machine
automatically determines where to store the address data. If there is address data
on the HDD, then the data is downloaded to the HDD. If HDD is not present, then
the address data is downloaded to the FCU.
To Next Page
Loading...
