IEEE 1394 FIREWIRE (G336)
B654 10 SM
1.6 IEEE 1394 FIREWIRE (G336)
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install the IEEE1394 option, the Printer Option must be installed first.
(!1.2.2) Only one slot is available for the interface option. You can install
only one printer interface option at a time: IEEE 1394, USB 2.0, IEEE
802.11b, or Bluetooth.
1. Remove the controller board and HDD unit (! 1.2.1).
2. Remove the cover [A] ( x 2). Save these screws.
3. Attach the USB 2.0 board [B] to the controller board [C] ( x 2). Use the screws
you removed in Step 2.
4. Make sure that the jumper [D] is set on “TB2”.
5. Re-install the HDD and re-install the controller board.
B654I105.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
