STAPLER
B546 8 SM
2.6 STAPLER
The staple hammer motor [A] drives the cam [B] via 2 gears [C, D] and the guide
roller on the staple hammer moves on the cam [D] . When the guide roller moves to
the highest position on the cam, the copy paper is stapled.
The stapler unit contains the cartridge set switch [E], staple end switch [F] and
staple position sensor [G].
The staple position sensor detects whether the staple sheet has come to the staple
unit or not.
D571.PCX
D110.WMF
D109.WMF
[A]
[B]
[C]
[D]
[D]
[A]
[E]
[F]
[G]
To Next Page
Loading...
