READING SC740/741 DETAILS FROM LED2:
B135/B138 4-26 SM
Error
Type
Error
Code
Description Status Possible Cause
1-11-1 After the positioning plate motor
turns on to move the positioning
plate from its home position, the
positioning plate HP sensor
does not deactivate within 1.25s.
1-11-2
Positioning
plate motor
error
After the positioning plate motor
turns on to return the positioning
plate to its home position, the
positioning plate HP sensor
does activate within 1 sec.
• Positioning plate
motor defective
• Positioning plate
HP sensor
defective
1-12-2 Folder roller
motor error
The folder roller motor sensor
doesn’t send the clock pulse to
the booklet unit board within a
certain period after the folder
roller motor turns on.
• Folder roller
motor defective
• Folder roller
motor sensor
defective
1-13-1 After the shutter guide motor
turns on to move the shutter
guide from its home position, the
shutter guide HP sensor does
not deactivate within 0.4s.
1-13-2
Shutter guide
motor error
After the shutter guide motor
turns on to return the shutter
guide to its home position, the
shutter guide HP sensor does
not activate within 1s.
• Shutter guide
motor defective
• Shutter guide HP
sensor defective
1-14-1 After the booklet jogger motor
turns on to move the booklet
jogger plate from its home
position, the booklet jogger HP
sensor does not deactivate
within 0.5s.
1-14-2
Booklet jogger
motor error
After the booklet jogger motor
turns on to return the booklet
jogger plate to its home position,
the booklet jogger HP sensor
does not activate within 1s.
• Booklet jogger
motor
defective
• Booklet jogger
HP sensor
defective
1-15-1 The front staple hammer HP
switch does not turn off within
0.5s after the front stapler motor
turns on.
1-15-2
Front stapler
motor error
The front staple hammer HP
switch does not turn on within
0.5s after the front stapler motor
turns on during jam recovery.
• Front stapler
motor defective
• Front staple
hammer HP
switch defective
1-16-1 The rear staple hammer HP
switch does not turn off within
0.5s after the rear stapler motor
turns on.
SC
1-16-2
Rear stapler
motor error
The rear staple hammer HP
switch does not turn on within
0.5s after the rear stapler motor
turns on during jam recovery.
• Rear stapler
motor defective
• Rear staple
hammer HP
switch defective
Rev. 04/2004
To Next Page
Loading...
