SERVICE PROGRAM MODE
SM 5-21 B135/B138
Service
Tables
APS Sensor Output Display 4301
Displays the time required to detect the size of the paper on the scanner exposure
glass. Asterisks (*) are displayed if the size cannot be detected.
Dimensions are displayed in inches for North America and in mm for other areas.
APS A5/LT Size Detection [0: not detected, 1: A5 length 5½ x 8½] 4303*
Determines whether the original is A5/HLT size when the APS sensor does not
detect the original size.
If 1 is selected, paper sizes that cannot be detected are regarded as A5 SEF. If 0
is selected, “Cannot detect original size” will be displayed.
8K/16K Detection 0: 8k/16k not detected,
1: 8K, 16K paper size detect enabled
4305*
Selects whether or not the copier determines that the original is 8K/16K size when
the APS sensor does not detect the original size. This SP is intended for use with
8K/16K Chinese paper sizes only and is effective only in China and Taiwan areas.
APS Sensor Output Display 0: Original size detection at power on disabled.
1: Original size detection at power on enabled
4307*
Determines whether or not the original size is detected while the exposure lamp
lights during initialization.
4428
Scanner Adjustment
DFU
4428 1
Flag Display
DFU
4428 2
Start
DFU
4428 3
Flag Reset
DFU
4901* SBU Setting
DFU
To Next Page
Loading...
