SERVICE PROGRAM MODE
B135/B138 5-58 SM
Pixel Coverage Ratio 7833
Displays the coverage ratio of the output (the ratio of the total pixel area of the
image data to the total printable area on the paper). Note that this value is not
directly proportional to the amount of toner consumed, although of course it is one
factor that affects this amount. The other major factors involved include: the type,
total image area and image density of the original, toner concentration and
developer potential.
7833 1* Last Pages 0% to 100%.
7833 2* Average Pages 0% to 100%.
7833 3* Toner Bottles In Use 0 to 65,535 copies
7833 4* Copy Count: Previous Toner Bottle 0 to 999,999 copies
7833 5* Copy Count: Toner Bottle Before Previous 0 to 999,999 copies
7834 Clear Pixel Coverage Data
These SPs clear the counters of SP7833 (see table above).
7834 1 Last & Average Clears counter for SP7833 001, 002
7834 2 Toner Bottles In Use Clears counter for SP7833 003
7834 3 Page Counts (2 Prev. Toner Bottles) Clears counter for SP7833 004, 005
7836 Total Memory Size
Displays the memory capacity of the controller system.
7852 ADF Scan Glass Dust Check Counter
Counts the number of occurrences (0 ~ 65,535) when dust was detected on the
scanning glass of the ADF. Counting is done only if SP4991 1 (ADF Scan Glass
Dust Check) is switched on. Memory All Clear (SP5801) resets this counter to zero
7901* Assert Info. DFU
These SP numbers display the results of the occurrence of the most recent SC
code generated by the machine.
7991 1* Source File Name Module name
7991 2* Line Number Number of lines
7991 3* Result Value
To Next Page
Loading...
