IMAGE FUSING AND PAPER EXIT
SM 6-91 B135/B138
Detailed
Descriptions
6.15.6 PRESSURE ROLLER
The pressure springs [A] apply constant
pressure between the hot roller [B] and
the pressure roller [C]. The applied
pressure can be changed by adjusting the
position of the pressure springs. The left
position [D] is the normal setting, and the
right position [E] increases the pressure to
prevent insufficient fusing by the fusing
unit.
B004D663.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
