Ricoh Aficio 2035e - Page 693

SCANNER SERVICE MODE
SM 25 B654
Printer/
Scanner
B654
SP2 Mode Number Function and [Setting]
2004 8* Contrast – Notch 7 [0-255 / 128 / 1 step]
9* Threshold Level – Notch 7 [0-255 / 128 / 1 step]
10* Brightness – Notch 6 [0-255 / 128 / 1 step]
11* Contrast – Notch 6 [0-255 / 128 / 1 step]
12* Threshold Level – Notch 6 [0-255 / 128 / 1 step]
13* Brightness – Notch 5 [0-255 / 128 / 1 step]
14* Contrast – Notch 5 [0-255 / 128 / 1 step]
15* Threshold Level – Notch 5 [0-255 / 128 / 1 step]
16* Brightness – Notch 4 [0-255 / 128 / 1 step]
17* Contrast – Notch 4 [0-255 / 128 / 1 step]
18* Threshold Level – Notch 4 [0-255 / 128 / 1 step]
19* Brightness – Notch 3 [0-255 / 128 / 1 step]
20* Contrast – Notch 3 [0-255 / 128 / 1 step]
21* Threshold Level – Notch 3 [0-255 / 128 / 1 step]
22* Brightness – Notch 2 [0-255 / 128 / 1 step]
23* Contrast – Notch 2 [0-255 / 128 / 1 step]
24* Threshold Level – Notch 2 [0-255 / 128 / 1 step]
25* Brightness – Notch 1 [0-255 / 128 / 1 step]
26* Contrast – Notch 1 [0-255 / 128 / 1 step]
27* Threshold Level – Notch 1 [0-255 / 128 / 1 step]
2005 [Photo Mode Settings]
1*
MTF Filter Coefficient
(Main Scan)
Selects the MTF filter coefficient in the main
scan direction for Photo mode.
Select a higher number for a stronger filter.
If this is “0”, the MTF filter is not applied.
[0-13 / 0 / 1 step]
2*
MTF Filter Coefficient
(Sub Scan)
As above, for sub scan
[0-13 / 0 / 1 step]
3*
MTF Filter Strength
(Main Scan)
Selects the MTF filter strength in the main scan
direction for Photo mode.
Select a higher number for a stronger filter.
[0-7 / 0 / 1 step]
4*
MTF Filter Strength
(Sub Scan)
As above, for sub scan
[0-7 / 0 / 1 step]
5* Smoothing Filter
Selects the smoothing pattern for Photo mode
when using binary picture processing mode.
A larger value could cause moiré to appear in
the image.
[0-7 / 7 / 1 step]
6* Scanner Gamma
Selects the scanner gamma type for Photo
mode when using binary picture processing
mode.
[0-11 / 7 / 1 step]
7* Dither Matrix Filter
Selects the dither matrix type for Photo mode
when using binary picture processing mode.
[1-11 / 5 / 1 step]
8* Brightness – Notch 7
Adjusts the image density for each image
density level for Photo mode when using binary
picture processing mode.
[0-255 / 128 / 1 step]