BIT SWITCHES
SM 29 B653
Fax Option
B653
System Switch 0F SP No. 1-101-016
No FUNCTION COMMENTS
0
to
7
Country/area code for
functional settings (Hex)
00: France 11: USA
01: Germany 12: Asia
02: UK 13: Japan
03: Italy 14: Hong Kong
04: Austria 15: South Africa
05: Belgium 16: Australia
06: Denmark 17: New Zealand
07: Finland 18: Singapore
08: Ireland 19: Malaysia
09: Norway 1A: China
0A: Sweden 1B: Taiwan
0B: Switz. 1C: Korea
0C: Portugal 20: Turkey
0D: Holland 21: Greece
0E: Spain 22: Hungary
0F: Israel 23: Czech
10: Canada 24: Poland
This country/area code determines the factory
settings of bit switches and RAM addresses.
However, it has no effect on the NCU parameter
settings and communication parameter RAM
addresses.
Cross reference
NCU country code: Function 06, parameter C.C.
System Switch 10 - Not used (Do not change the factory settings.)
System Switch 11 SP No. 1-101-018
No FUNCTION COMMENTS
0
TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TTI overprints information
that the customer considers to be important (G3
transmissions).
1
TSI (G3) or CIL/TID (G4)
printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TSI (G3) or CIL/TID (G4)
overprints information that the customer considers
to be important.
CIL: Command Information Line (Group 4)
2-6 Not used Do not change the factory settings.
7
Use of parallel memory
transmission with G4
transmission
0: Disabled 1: Enabled (Japan
Only)
This determines whether parallel transmission can
be used with a G4 transmission or not.
Note that this bit is only effective if Parallel Memory
transmission is enabled (User Parameter 07 - bit 2).
To Next Page
Loading...
