1000 SHEET FINISHER (B408)
SM 1-57 B135/B138
Installation
3. Install the front joint bracket [A] (2 screws - M4 x 14) and rear joint bracket [B]
( x 2 M4 x 14).
4. Install the grounding plate [C] to the finisher ( x 2 M3 x 8).
NOTE: Use the screw removed in step 1 and the screw from the accessory
box.
5. Open the front door [D] then pull the locking lever [E].
6. Align the finisher on the joint brackets, and lock it in place by pushing the
locking lever.
7. Secure the locking lever ( x 1 knob screw M3 x 8).
8. Close the front door.
9. Install the copy tray [F] ( x 1 knob screw M4 x 10).
10. Connect the finisher cable [G] to the main machine below the right rear handle.
B408I503.WMF
B408I201.WMF
B408I504.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
To Next Page
Loading...
