NVRAM
B692/B694 8 SM
16. Switch the main power switch off, then switch it on again.
17. Insert the IC card or SD card with the uploaded NVRAM data into the controller
slot.
18. Enter the SP mode and do SP5825 (NVRAM Data Download).
19. In the “Copy SP” mode, confirm the correct settings of the following SPs:
SP No. SP Name Correct Setting
5871 001 HDD Function Disable 1 (On)
5967 001 Copy Server Set Function 1 (Disable)
5846 090 USC Settings - Plain Data Forbidden 1 (Check)
5836 001 Capture Settings – Capture Function 0 (Disable)
20. Exit the “Copy SP” mode and enter the “Print SP” mode.
21. Confirm the correct setting of SP1006.
SP No. SP Name Correct Setting
1006 001 Sample/Locked Print 1 (Enable)
22. Connect the network cable if the NIB option is installed.
23. Connect the fax cable if the fax option is installed.
To Next Page
Loading...
