Ricoh Aficio CL7200 - Page 103

Troubleshooting
103
Proxy User Name/
Password error
Proxy user name and/or pass-
word are incorrect.
Change current user and password to
the correct user name and password.
Proxy setting or
connection error
Proxy address port number is
invalid. Proxy is not active or
not set.
Check the proxy settings.
RC Gate
connection error
Cannot communicate with RC
Gate.
Check the device or the RC Gate net-
work connection.
Ready The default ready message.
The printer is ready to use.
No action required.
Remove Misfeed
A:Internal Path
/ See Instructions
in Front Cover
There is a misfeed in the print-
er.
Remove the misfed paper following
the instructions inside the front cover.
See p.138 “
When “Remove Misfeed
A:Internal Path” Appears”.
Remove Misfeed
B:Fusing Unit
/ See Instructions
in Front Cover
There is a misfeed in the fusing
unit.
Remove the misfed paper following
the instructions inside the front cover.
See p.139 “
When “Remove Misfeed
B:Fusing Unit” Appears”.
Remove Misfeed
R:Finisher
/ Open
Finisher Cover
There is a misfeed in the finish-
er.
Open the finisher cover and remove
the misfed paper.
See p.142 “
When “Remove Misfeed
R:Finisher” Appears”.
Remove Misfeed
Y:Paper Tray
/ See Instructions
in Front Cover
There is a misfeed in the speci-
fied input tray, or the printer is
not feeding paper.
Remove the misfed paper following
the instructions inside the front cover.
See p.150 “
When “Remove Misfeed
Y:Paper Tray” Appears”.
Remove Misfeed
Z1:Duplex Unit
/ See Instructions
in Front Cover
There is a misfeed in the duplex
unit.
Remove the misfed paper following
the instructions inside the front cover.
See p.151 “
When “Remove Misfeed
Z1:Duplex Unit” Appears”.
Remove Misfeed
Z2:Dup.Feed Unit
/ Open
Front Cover
There is a misfeed in the duplex
feed unit.
Remove the misfed paper.
See p.153 “
When “Remove Misfeed
Z2:Dup.Feed Unit” Appears”.
Remove Paper
All Output Trays
All output trays are full. Remove paper from all output trays.
Remove Paper
Finisher Tray #
The indicated finisher shift tray
is full.
#: finisher shift tray number
Remove the paper from the indicated
finisher shift tray.
Messages
/ Second messages
Description Solution