Paper and Other Media
18
• Adhesive label paper on which glue or base paper is exposed
• Paper with clips or staples
Print Area
The following shows the print area for this printer. Be sure to set the print margins
correctly by the application.
❖ Paper
A Print area
B Feed direction
C Approx. 4.2 mm (0.17 inches)
D Approx. 4.2 mm (0.17 inches)
❒ Print area may vary depending on paper size, printer language, and printer
driver settings.
❒ If you load paper larger than A3L in the bypass tray, hold it steady so it
feeds properly. Paper feed accuracy and print quality may vary according
to paper thickness and width. Do a test print to check the paper you want
to use gives satisfactory results.
❒ The maximum length of the print area is 457 mm (18”) in the paper feed
direction (at 1200×1200 dpi). If paper exceeding 457 mm (18”) in the paper
feed direction is used, the machine may not print properly.
To Next Page
Loading...
