Adjusting the Printer
89
❖ Relationship between the gradation correction sheets and the display
The printed gradation correction sheet and display correspond as shown in
the following diagram. The gradation correction sheets are used to determine
the correction values for the colors K (black), M (magenta), C (cyan), and Y
(yellow). These values are set using the control panel.
❒ XXXX represents the printer model name.
A K (black) correction values
Use to adjust the color printed when only black toner is used. The currently
set correction value is printed in red.
B M (magenta) correction values
Use to adjust the color printed when only magenta toner is used. The cur-
rently set correction value is printed in red.
C C (cyan)/Y (yellow) correction values
Use to adjust the color printed when cyan and yellow toner are used. For
C/Y (cyan/yellow), the correction values are determined based on a com-
bination of these two colors, although settings are made separately for
each color.
D K, M, C/Y
The numerical values set at time of gradation correction sheet printing are
shown. These correspond to the numerical values set using the control
panel.
Resetting the gradation correction values to the initial values
Reset the correction value default.
To Next Page
Loading...
