Troubleshooting
116
The color changes considerably
when you adjust it with the RPC-
S
TM
printer driver.
When you adjust the color on the [Balance Adjustments] tab of
the RPCS
TM
printer driver [Change User Settings] dialog box,
do not change the values too much. Note that the printed col-
ors will not be exactly the same as those in the sample im-
age.
For details, see the printer driver Help.
Photographs are grainy. Some applications require the resolution to be reduced when
printing. On the [Print Quality] tab, set [Print priority] to [Quality].
For details, see the printer driver Help.
Fine dot patterns do not come
out.
In the RPCS
TM
printer driver [Change User Settings] dialog box,
change the [Dithering:] setting on the [Image Adjustments] tab.
For details, see the printer driver Help.
Black areas and lines are not
pure black
In the RPCS
TM
printer driver [Change User Settings] dialog box,
set [Gray reproduction (Text/Line Art):] on the [Image Adjustments]
tab to [K (Black)].
For details, see the printer driver Help.
The black areas in the gradation
are not pure black.
In the RPCS
TM
printer driver [Change User Settings] dialog box,
set [Gray reproduction (Text/Line Art):] on the [Image Adjustments]
tab to [CMY + K].
For details, see the printer driver Help.
Solid lines are printed as broken
lines.
In the RPCS
TM
printer driver [Change User Settings] dialog box,
change the [Dithering:] setting on the [Image Adjustments] tab.
For details, see the printer driver Help.
Two or more sheets are fed to-
gether.
In the RPCS
TM
printer driver [Change User Settings] dialog box,
change the [Dithering:] setting on the [Image Adjustments] tab.
For details, see the printer driver Help.
Fan the sheets well before loading them.
See p.20 ā
Loading Paperā.
Problem Possible causes and solutions
To Next Page
Loading...
