Appendix
169
❖ Required Cable:
IEEE 1394 interface cable (6 × 4 pins, 6 × 6 pins)
❒ You cannot plug devices together to create loops.
❒ Do not use a cable that is more than 4.5 meters long.
❖ Connectable number of devices in a bus:
Maximum 63
❖ Allowed cable hops in a bus:
Maximum 16
❖ Data Transmission:
400 Mbps (Maximum)
❖ Power Supply:
No separate power supply
Cable Power repeated (IEEE 1394a-2000 compliant)
IEEE 1284 Interface Board Type A
❖ Transmission Spec.:
IEEE 1284
❖ Required Cable
Standard IEEE 1284 compliant Micro Centronics 36 pin cable
IEEE 802.11b Interface Unit Type H
❖ Transmission Spec.:
Based on IEEE 802.11b (wireless LAN)
❖ Protocol:
TCP/IP, IPX/SPX, AppleTalk
❒ RPDL and Web Image Monitor are supported.
❖ Data Transfer Speed:
1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps
(auto selected)
❖ Frequency Range:
• Inch version:
2412-2462 Mhz (1-11 channels)
• Metric version:
2412-2472 Mhz (1-13 channels)
To Next Page
Loading...
