Paper and Other Media
24
A Slowly pull out the paper tray, until it stops.
B With the print side down, align all four sides of the two paper stacks, and
then load them next to each other in the tray. Each side has a limit of
1,000 sheets.
❒ Align the paper and load the stacks against the left and right walls, or mis-
feeds might occur.
❒ Check that the top of the stack is not higher than the limit mark inside the
tray.
C Slowly push in the paper tray until it stops.
If you load a paper size that is not selected automatically
❒ Paper sizes not selected automatically are B4L, A4L, B5L, 7
1
/
4
× 10
1
/
2
L,
8 × 13L, 8
1
/
2
× 13L, 8
1
/
4
× 13L, 8K (10
1
/
2
× 15.35)L, 16K (7.68 × 10
1
/
2
)L,
16K (10
1
/
2
× 7.68)K.
See p.21 “Loading Paper in Tray 2 and Paper Feed Unit Type 7300”, for de-
tails about how to load the paper.
To Next Page
Loading...
