Paper and Other Media
29
❒ The number of pages that can be loaded in the bypass tray differs depending
on paper type. Check that the top of the stack is not higher than the limit mark
inside the tray.
❒ When loading paper in the bypass tray, use L orientation if possible.
❒ When loading the bypass tray with paper that will be delivered into the top-left
tray, load the paper so the side you want to print on faces up.
❒ You cannot use the following functions when printing on paper loaded in the
bypass tray:
•Duplex Print
• Job Separation
• Staple/Punch
• Auto Tray Select
A Open the bypass tray.
❒ If you load A4 or larger size paper, pull out the bypass tray extension, and
then flip it open.
To Next Page
Loading...
