Paper and Other Media
33
• Staple, Punch
• Auto Tray Select
❒ Be sure to select the paper type when you load labels, thick paper, or OHP
transparencies in the bypass tray.
❒ When printing labels, select thick paper as the paper type.
A Press the {Menu} key.
The [Menu] screen appears on the display.
B Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter} key.
The paper selection menu appears.
C Press the {U} or {T} key to display [Paper Type], and then press the {# En-
ter} key.
The paper tray selection menu appears.
D Press the {U} or {T} key to display [Bypass Tray], and then press the {#
Enter} key.
The paper type selection menu appears.
E Press the {U} or {T} key to display the target paper type, and then press
the {# Enter} key.
After about two seconds, the display returns to the menu.
Menu:
Paper Input
Bypass Tray:
*Thick Paper
To Next Page
Loading...
