Replacing Consumables and Maintenance Kit
39
B Lower the duplex reversal unit slowly until it stops.
❒ Open the duplex reversal unit after detaching the 2 tray finisher or the
booklet finisher from the printer. See p.37 “
Detaching the SR960 (2 Tray
Finisher)” or p.38 “Detaching the SR950 (Booklet Finisher)”.
❒ You do not have to remove the external tray even if the 2 tray finisher or
the booklet finisher is attached.
The duplex reversal unit is opened.
C Close the duplex reversal unit by raising it slowly using both hands, and
push it in, until it clicks into place.
The duplex reversal unit is closed.
❒ Attach the duplex reversal unit after closing the printer's upper left cover.
To Next Page
Loading...
