Replacing Consumables and Maintenance Kit
61
L If you removed the external tray in step
D
, reattach it to the printer. Insert
the hooks of the external tray into the printer slits, and lower it toward
you.
M If the duplex unit is installed, close the duplex reversal unit.
p.38 “Opening and Closing the Duplex Reversal Unit”
N If the 2 tray finisher or the booklet finisher is installed, reattach it to the
printer.
p.37 “Detaching the SR960 (2 Tray Finisher)”
p.38 “Detaching the SR950 (Booklet Finisher)”
O Plug in the power cable, and then turn on the power.
To Next Page
Loading...
