Replacing Consumables and Maintenance Kit
71
H Hold the new paper feed roller C with its gear towards the shaft. Insert it
into the rear shaft so that the roller gear interlocks with the shaft gear
( ). Lock the roller with the stopper ( ).
I Hold the new paper feed roller B with its gear towards the shaft. Insert it
into the rear shaft so that the roller gear interlocks with the shaft gear
( ). Lock the roller with the stopper ( ).
J Hold the new paper feed roller A with its pin towards you ( ). Insert the
roller onto the front shaft until it clicks into place ( ).
K Slowly slide all trays back into the printer until they stop.
❒ If you are replacing the paper feed rollers of the optional 2000-sheet Large
Capacity Tray, load the stocks removed in step
B
into the tray.
To Next Page
Loading...
