Special Senders to Treat Differently
143
4
Programming/Changing Special Senders
This section describes how to program and change Special Senders.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [TNext].
D Press [Program Special Sender].
E Check [Program / Change] is selected.
F Select the destination to program or change.
When programming a new Special Sender, press [*Not Programmed].
G Enter a destination name, and then press [OK].
Enter a destination name using Own Name or Own Fax Number.
H Press [Full Agreement] or [Partial Agreement].
I Select the item you want to program.
You must select only the item you want to program.
To cancel these settings, press [Cancel]. The display returns to that of step
F
.
J Press [OK].
A Special Sender is programmed.
To program another sender, repeat the procedure from step
F
.
K Press [Exit].
To Next Page
Loading...
