Ricoh Aficio MP 3500SP General Settings Guide

Printer Features
176
5
Host Interface
This section describes the user tools in the Host Interface menu under Printer
Features.
Default settings are shown in bold type.
❖ I/O Buffer
You can set the size of the I/O Buffer. Normally it is not necessary to change
this setting.
The default setting is 128KB.
❖ I/O Timeout
You can set how many seconds the machine should wait before ending a print
job. If data from another port usually arrives in the middle of a print job, you
should increase this timeout period.
The default setting is 15 seconds.
Reference
p.3 “Accessing User Tools”

Ricoh Aficio MP 3500SP Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	35 ppm
Print Resolution	1200 x 1200 dpi
Max. Black Print Resolution	1200 x 1200 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Modem Speed	33.6 Kbps
Original Size	Up to A3
Maximum Paper Size	A3
Duplex Printing	Yes
First Print Time	6.5 seconds
Hard Disk Drive	Optional
Display	LCD Touch Panel
Paper Capacity	1, 100 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5
Network Connectivity	Ethernet
Operating System Compatibility	Windows, macOS, Linux
Power Source	AC 220-240V