Ricoh Aficio MP 3500SP - Program; Change; Delete LDAP Server

Administrator Tools
71
2
Program / Change / Delete LDAP Server
This section describes how to specify the LDAP server settings.
To program / change the LDAP server
This section describes how to program / change the LDAP server.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext] twice.
D Press [Program / Change / Delete LDAP Server].
E Check that [Program / Change] is selected.
F Select the LDAP server you want to program or change.
When programming the server, select [*Not Programmed].
G Set each item as necessary.
H Press [OK] after setting each item.
For details about LDAP server, see "Programming the LDAP server".
I Press [Exit].
J Press the {User Tools/Counter} key.
Reference
p.72 “Programming the LDAP server”
To delete the programmed LDAP server
This section describes how to delete the programmed LDAP server.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext] twice.
D Press [Program / Change / Delete LDAP Server].
E Press [Delete].
F Select the LDAP server you want to delete.
G Press [Yes].
H Press [Exit].