Registering Addresses and Users for Facsimile/Scanner Functions
224
7
C Press [TNext].
D Press [Address Book Management].
E Check that [Program / Change] is selected.
F Select the name whose folder you want to register. Press the name key, or
enter the registered number using the number keys.
If you press , you can search by the registered name, user code, fax number,
folder name, e-mail address, or IP-Fax destination.
G Press [Auth. Info], and then press [TNext].
H Press [Specify Other Auth. Info] on the right side of Folder Authentication.
When [Do not Specify] is selected, the SMB User Name and SMB Password that
you have specified in Default User Name / Password (Send) of File Transfer
settings applies.
I Press [Change] under "Login User Name".
J Enter the login user name, and then press [OK].
K Press [Change] under "Login Password".
L Enter the password, and then press [OK].
M Enter the password again to confirm, and then press [OK].
N Press [Folder].
O Check that [SMB] is selected.
To specify a folder, you can either enter the path manually or locate the folder
by browsing the network.
P Press [Connection Test] to check the path is set correctly.
Q Press [Exit].
If the connection test fails, check the settings, and then try again.
To Next Page
Loading...
