System Settings
44
2
❖ Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function.
This is useful if you are making many copies and have to change settings for
each copy. If you set a longer reset period, you can prevent interruption from
other functions.
The Function Reset Timer setting is ignored if [Interleave] is set for Print Prior-
ity.
The default setting is Set Time.
When you select [Set Time], enter the time (3–30 seconds, in 1 second incre-
ments) using the number keys.
The default setting for Set Time is 3 seconds.
❖ Output: Copier (copier)
Specify a tray to which documents are delivered.
1. Finisher Upper Tray
2. Finisher Shift Tray
3. Finisher Shift Tray 1
4. Finisher Shift Tray 2
5. Internal Tray 1
6. Internal Tray 2
The default setting is Internal Tray 1.
❖ Output: Document Server (Document Server)
Specify a tray to which documents are delivered.
The default setting is Internal Tray 1.
❖ Output: Facsimile (facsimile)
Specify a tray to which documents are delivered.
The default setting is Internal Tray 2.
ATX001S
To Next Page
Loading...
