Edit
87
3
❖ Separation Line in Combine
You can select a separation line using the Combine function from: None, Sol-
id, Broken A, Broken B, or Crop Marks.
•None
• Solid
•Broken A
•Broken B
• Crop Marks
The default setting is None.
Selecting solid or broken lines might produce a blank area of approximately
1.5 mm (0.06") in width along the separation line.
❖ Copy on Designating Paper
Specify whether to copy onto slip sheets.
The default setting is Yes.
❖ Front Cover Copy in Combine
You can make a combined copy on the front cover sheet when you select
Front Cover mode.
The default setting is Combine.
❖ Copy on Designating Page in Combine
Specify whether to make a combined copy on the inserted slip sheets in
Desig./Chapter mode.
The default setting is Combine.
GCST019E
To Next Page
Loading...
