Protection Using Encryption
145
5
C Install the certificate by following the Certificate Import Wizard instruc-
tions.
Note
❒ For details about how to install the certificate, see the Web Image Monitor
Help.
❒ If a certificate issued by a certificate authority is installed in the printer,
confirm the certificate store location with the certificate authority.
Reference
For details about where to store the certificate when accessing the machine
using IPP, see the SmartDeviceMonitor for Client Help.
Setting the SSL / TLS Encryption Mode
By specifying the SSL/TLS encrypted communication mode, you can change the
security level.
❖ Encrypted Communication Mode
Using the encrypted communication mode, you can specify encrypted com-
munication.
Setting the SSL / TLS Encryption Mode
This can be specified by the network administrator.
After installing the server certificate, specify the SSL/TLS encrypted communi-
cation mode. By making this setting, you can change the security level.
Preparation
For details about logging on and logging off with administrator authentica-
tion, see p.23 “Logging on Using Administrator Authentication”, p.26 “Log-
ging off Using Administrator Authentication”.
A Press the {User Tools/Counter} key.
Ciphertext Only Allows encrypted communication only.
If encryption is not possible, the machine
does not communicate.
Ciphertext Priority Performs encrypted communication if en-
cryption is possible.
If encryption is not possible, the machine
communicates without it.
Ciphertext / Clear Text Communicates with or without encryption,
according to the setting.
To Next Page
Loading...
Need help?
General
