Ricoh Aficio MP C2050 User Manual

11. Press [Yes].
12. When overwriting is completed, press [Exit], and then turn off the main power.
Before turning the power off, see "Turning On the Power", About This Machine.
• Should the main power switch be turned to [Off] before Erase All Memory is completed, overwriting
will continue once the main power switch is turned back to [On].
• If an error occurs before overwriting is completed, turn off the main power. Turn it on again, and then
repeat from step 2.
• If you specify to both overwrite and encrypt the data, the data will all be encrypted.
• p.34 "Logging on Using Administrator Authentication"
• p.35 "Logging off Using Administrator Authentication"
• p.136 "Methods of Overwriting"
Suspending Erase All Memory
The overwriting process can be suspended temporarily.
• Erase All Memory cannot be cancelled.
1. Press [Suspend] while Erase All Memory is in progress.
2. Press [Yes].
Erase All Memory is suspended.
3. Turn off the main power.
Before turning the power off, see "Turning On the Power", About This Machine.
• To resume overwriting, turn on the main power.
5. Protecting Information Transmitted Through the Network or Stored on the Hard Disk from Leaks
142
5

Ricoh Aficio MP C2050 Specifications