Network Administrator Settings
The network administrator settings that can be specified are as follows:
System Settings
The following settings can be specified.
Interface Settings
If DHCP is set to On, the settings that are automatically obtained via DHCP cannot be specified.
• Network
All the settings can be specified.
• Wireless LAN
Communication Mode
SSID Setting
Ad-hoc Channel
Security Method
Restore Factory Defaults
File Transfer
• SMTP Server
Server Name
Port No.
• E-mail Communication Port
• E-mail Reception Interval
• Max. Reception E-mail Size
• E-mail Storage in Server
• Auto Specify Sender Name
• Scanner Resend Interval Time
• Number of Scanner Resends
Administrator Tools
• Administrator Authentication Management
Network Management
• Program / Change Administrator
Network Administrator
You can specify the user name and change the full-control user's authority.
10. Appendix
258
To Next Page
Loading...
