Error Code Cause Solution
3. A driver encryption key error
occurred.
Make sure that the encryption
key is correctly specified on the
driver.
L0105-000
A login user name was not
specified but a DeskTopBinder
operation was performed.
Set the DeskTopBinder login
user name correctly.
L0206-002
A user attempted
authentication from an
application on the "System
Settings" screen, where only
the administrator has
authentication ability.
Only the administrator has
login privileges on this screen.
Log in as a general user from
the application's login screen.
L0206-003
An authentication error
occurred because the user
name contains a space, colon
(:), or quotation mark (").
Recreate the account if the
account name contains any of
these prohibited characters.
If the account name was
entered incorrectly, enter it
correctly and log in again.
L0207-001
An authentication error
occurred because the Address
Book is being used at another
location.
Wait a few minutes and then try
again.
L0306-018
The LDAP server is not correctly
configured.
Make sure that a connection
test is successful with the current
LDAP server configuration.
L0307-001
An authentication error
occurred because the Address
Book is being used at another
location.
Wait a few minutes and then try
again.
L0406-200
Authentication cannot be
completed because of the high
number of authentication
attempts.
Wait a few minutes and then try
again.
If the situation does not return to
normal, make sure that an
9. Troubleshooting
232
To Next Page
Loading...
