Items for Specifying Scan Settings
109
6
C Press [Custom Size].
D Specify Original Size (X1 and Y1) using the number keys, and then press
{q}.
For example, set X1 to 17.0 inch and Y1 to 8.0 inch.
E Set Start Position (X2 and Y2) to 0 inch, and then press {q}.
For example, set X2 and Y2 to 0 inch, and press {q}.
F Specify Scan Area (X3 and Y3) using the number keys, and then press {q}.
For example, set X3 to 17.0 inch and Y3 to 8.0 inch.
G Press [OK].
H Check Scan Area (X3 and Y3) displayed above [Custom Size], and then press
[OK].
To Next Page
Loading...
