Stamp
113
3
❖ Stamp Setting
Specify how Date Stamp is printed.
•Stamp Position
Specify where to print the Date Stamp.
• Top Left
•Top Centre
• Top Right
•Bottom Left
•Bottom Centre
• Bottom Right
•Stamp Position
You can adjust the position of the Date Stamp within the available ranges
shown below.
•Metric version:
"Top Left"…T/B: 4-144mm, L/R: 4-144mm
"Top Centre"…T/B: 4-144mm, L/R: 72-72mm
"Top Right"…T/B: 4-144mm, L/R: 4-144mm
"Bottom Left"…T/B: 4-144mm, L/R: 4-144mm
"Bottom Centre"…T/B: 4-144mm, L/R: 72-72mm
"Bottom Right"…T/B: 4-144mm, L/R: 4-144mm
• Inch version:
"Top Left"…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Top Centre"…T/B: 0.1"-5.7", L/R: 2.8"-2.8"
"Top Right"…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Bottom Left"…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Bottom Centre"…T/B: 0.1"-5.7", L/R: 2.8"-2.8"
"Bottom Right"…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
• All Pages
•1st Page Only
To Next Page
Loading...
