Registering a Protection Code
271
7
Registering a Protection Code to a Group User
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book: Program / Change / Delete Group].
D Check that [Program / Change] is selected.
E Press the group key you want to register or enter the registered number us-
ing the number keys.
F Press [Protection].
G Press [Folder Destination] under Protection Object.
H Press [Change] under Protection Code.
I Enter a protection code using the number keys, and then press the {q} key.
J Press [OK].
K Press [Exit].
Note
❒ Specify a protection code of up to eight digits. You can also specify "Pro-
tection" without specifying a protection code.
To Next Page
Loading...
