Special Senders to Treat Differently
167
4
Authorized RX (Authorized Reception)
Specify when programming a Special Sender.
A Press [Authorized Reception per Sender].
B Press [On] or [Off], and then press [OK].
Reception File Print Qty
Specify when programming a Special Sender.
A Press [RX File Print Quantity per Sender].
B Press [Number of Sets].
C Enter the print quantity using the number keys, and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
"RX File Print Qty" of "Reception Settings".
❒ If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
To Next Page
Loading...
