System
191
5
System
This section describes the user tools in the System menu under Printer Features.
Default settings are shown in bold type.
❖ Print Error Report
Select this to have an error report printed when a printer or memory error oc-
curs.
•On
• Off
❖ Auto Continue
You can select this to enable Auto Continue. When it is On, printing continues
after a system error occurs.
• Off
• Immediate
•1 minute
•5 minutes
• 10 minutes
• 15 minutes
❖ Memory Overflow
Select this to have a memory overflow error report printed.
• Do not Print
•Error Information
❖ Job Separation
You can enable Job Separation.
This menu can be selected only when a finisher (optional) is installed.
•On
• Off
❖ Auto Delete Temporary Print Jobs
You can select to automatically delete print jobs temporarily stored in the ma-
chine.
•On
• Off
If you select [On], you can set up to 200 hours for auto file deleting.
❖ Auto Delete Stored Print Jobs
You can select to automatically delete print jobs stored in the machine.
• On: 3 day(s)
•Off
If you select [On], you can set up to 180 days for auto file deleting.
To Next Page
Loading...
Need help?
General
