Reception Settings
135
4
❖ Memory Lock Reception
When you switch Memory Lock on, received documents are stored in mem-
ory and not printed automatically. When a document is received in the Mem-
ory Lock mode, the Confidential File indicator blinks. To print this document,
enter the Memory Lock ID. A user without the ID cannot print the document.
This prevents unauthorized users from accessing the document. To use Mem-
ory Lock, program the Memory Lock ID, and then switch Memory Lock on.
To store incoming documents from Special Senders only in Memory Lock,
program each sender with "Special Senders to Treat Differently".
This function is not available with Internet Fax.
A Press [Facsimile Features].
B Press [Reception Settings], and then press [TNext].
C Press [TNext].
D Press [Memory Lock Reception].
E Select [On] or [Off], and then press [OK].
F Press the {User Tools/Counter} key.
Reference
p.3 “Accessing User Tools”
p.141 “Reception File Setting”
p.49 “Output: Facsimile (facsimile)”
p.161 “Special Senders to Treat Differently”
p.137 “Program Memory Lock ID”
p.227 “Registering a Fax Destination”
p.259 “Registering Names to a Group”
To Next Page
Loading...
Need help?
General
