Fax Destination
231
7
To set label insertion
When Label Insertion is set to ON, the receiver's name and standard messages
are printed on the fax message when it is received at the other end.
A Press [Change] under Label Insertion.
B Press [On].
C Press [Change] under Line 2.
D Select the new standard message or press [Manual Entry] to enter the new
message.
E Enter the new message, and then press [OK].
F Press [OK].
G Press [Change] under Line 3.
H Select the new standard message, and then press [OK].
I Press [OK].
Note
❒ To change the name, key display and title, see "Changing a Registered Name".
Reference
p.214 “Changing a Registered Name”
Deleting a Fax Destination
Important
❒ If you delete a destination that is a specified delivery destination, messages to
its registered Personal Box, for example, cannot be delivered. Be sure to check
the settings in the fax function before deleting any destinations.
A Press [System Settings].
B Press [Administrator Tools].
To Next Page
Loading...
Need help?
General
